Dermagenskincare

THE ART OF PEELINGS

PRODUCT INFO AND INSTRUCTIONS FOR USE

MASTER PEEL 10

Master Peel 10 exfoliating treatments are appropriate for all skin types, conditions and sensitivities. They will effectively treat acne, pigment disorders, aging skin, smoker’s skin and photo-damaged skin. The treatment is ideal for super-sensitive skin types, as it has little to no stringing sensation. It targets patients that want gradual lightening but not instant tightening.

1. Cleanse the skin thoroughly with face body cleanser.

2. Apply Day exfoliating treatment to a cotton pad, placing the neck of the bottle directly onto the pad, spacing it to give a sufficient working area to complete a full-face treatment. (About 4-5 spots on the pad.) Apply an even layer to the area of treatment.

3. Allow the first layer to penetrate. Ask the patient, “On a scale of one-to-ten, ten being extremely irritating, how does your skin feel?” If they respond higher than six, do not proceed with another layer. If the answer is between one and five, proceed with another layer. (Burning is a sensation you feel, not one you see.) Give the patient a fan to cool him or herself. Allow the layer to penetrate for five minutes and then apply the second coat. The skin will have a slightly tacky feeling. Apply maximumof three layers, on sensitive skin and up to four layers on resilient.

You may apply Vit C Serum dyschromia controller at this point.

For additional strengthening, hydrating and anti-inflammatory benefits, apply two pumps of Toner all over the area of treatment. For lightening, anti-inflammatory, increased cell turnover and pore refining action, apply Vit C masks to the area of treatment.

After allowing the previous masks to penetrate (20-30 minutes), apply Vit. C Serum.

Optional: if the patient would like increased exfoliaton and hydration, a small amount of White Peel exfoliating treatment may be applied after 2nd coat.

Finish with a mixture of post peel recovery SPF 30 to seal / occlude the treated area.

Master Peel 10 exfoliating treatment Ingredients: Thrichloroacetic acid (10%) & Phytic colour (blue).

MASTER PEEL 20

Master Peel 20 exfoliating treatments are appropriate for all skin types, conditions and sensitivities. They will effectively treat acne, pigment disorders, aging skin, smoker’s skin and photo-damaged skin. The treatment is ideal for super-sensitive skin types, as it has little to no stringing sensation. It targets patients that want gradual lightening but instant tightening.

1. Cleanse the skin thoroughly with Hydraven Gel. Rinse.

2. Apply Tri Peel exfoliating treatment to a cotton pad, placing the neck of the bottle directly onto the pad, spacing it to give a sufficient working area to complete a full-face treatment. (About 4-5 spots on the pad.) Apply an even layer to the area of treatment.

3. Allow the first layer to penetrate. Ask the patient, “On a scale of one-to-ten, ten being extremely irritating, how does your skin feel?” If they respond higher than six, do not proceed with another layer. If the answer is between one and five, proceed with another layer after five minutes. (Burning is a sensation you feel, not one you see.) Give the patient a fan to cool him or herself. Allow the layer to penetrate. The skin will have a slightly tacky feeling. Apply maximum two layers, on sensitive skin and up to four on resilient).

You may apply Vit C Serum dyschromia controller at this point.

For additional strengthening, hydrating and anti-inflammatory benefits, apply two pumps of Toner all over the area of treatment. For lightening, anti-inflammatory, increased cell turnover and pore refining action, apply Vit C masks to the area of treatment.

After allowing the previous masks to penetrate (20-30 minutes), apply post peel cream to seal/occlude the area for 3 days, 4 times a day.

Optional: if the patient would like increased exfoliation and hydration, a small amount of White Peel exfoliating treatment may be applied after the 1st coat.
Finish with a mixture of post peel cream + SPF 30 to seal / occlude the treated area.

Master Peel 20 exfoliating treatment Ingredients: Thrichloroacetic acid (20%) & Phytic
colour (blue).

MASTER PEEL 30

Master Peel 30 exfoliating treatments are appropriate for all skin types, conditions and sensitivities. They will effectively treat acne, pigment disorders, aging skin, smoker’s skin and photo-damaged skin. The treatment is ideal for super-sensitive skin types, as it has little to no stringing sensation. It targets patients that want gradual lightening but instant tightening.

1. Cleanse the skin thoroughly with Hydraven Gel. Rinse.

2. Apply Master Peel 30 exfoliating treatment to a cotton pad, placing the
neck of the bottle directly onto the pad, spacing it to give a sufficient working area to complete a full-face treatment. (About 4-5 spots on the pad.) Apply an even layer to the area of treatment.

3. Allow the first layer to penetrate. Burning is a sensation they feel. Give
the patient a fan. Allow the layer to penetrate. The skin will have a slightly tacky feeling. Depending on the patient’s feeling apply an other coat after five minutes. Apply maximum two layers, on sensitive skin and up to three on resilient).


You may apply Vit C Serum dyschromia controller at this point.

For additional strengthening, hydrating and anti-inflammatory benefits, apply two pumps of Toner all over the area of treatment. For lightening, anti-inflammatory, increased cell turnover and pore refining action, apply Vit C masks to the area of treatment for 30 minutes.

Finish with a mixture of post peel cream + SPF 30 to seal / occlude the treated area for 3-5 days, 4 times a day.

Master Peel 30 exfoliating treatment Ingredients: Thrichloroacetic acid (30%) & Phytic colour (blue).

Day Peel exfoliating treatments are appropriate for all skin types, conditions and sensitivities. They will effectively treat acne, pigment disorders, aging skin, smoker’s skin and photo-damaged skin. The treatment is ideal for super-sensitive skin types, as it has little to no stringing sensation. It targets patients that want gradual lightening but not instant tightening.

1. Cleanse the skin thoroughly with face body cleanser.

2. Apply Day exfoliating treatment to a cotton pad, placing the neck of the bottle directly onto the pad, spacing it to give a sufficient working area to complete a full-face treatment. (About 4-5 spots on the pad.) Apply an even layer to the area of treatment.

3. Allow the first layer to penetrate. Ask the patient, “On a scale of one-to-ten, ten being extremely irritating, how does your skin feel?” If they respond higher than six, do not proceed with another layer. If the answer is between one and five, proceed with another layer. (Burning is a sensation you feel, not one you see.) Give the patient a fan to cool him or herself. Allow the layer to penetrate. The skin will have a slightly tacky feeling. Apply maximum of two layers (on sensitive skin-up to three on resilient).

You may apply Vit C Serum dyschromia controller at this point.

For additional strengthening, hydrating and anti-inflammatory benefits, apply two pumps of Toner all over the area of treatment. For lightening, anti-inflammatory, increased cell turnover and pore refining action, apply Vit C masks to the area of treatment.

After allowing the previous masks to penetrate (20-30 minutes), apply Vit. C Serum.

Optional: if the patient would like increased exfoliation and hydration, a small amount of White Peel exfoliating treatment may be applied after 2nd coat.

Finish with a mixture of post peel recovery SPF 30 to seal / occlude the treated area.

Day Peel exfoliating treatment Ingredients: Thrichloroacetic acid (10%)

TRI PEEL

Tri Peel exfoliating treatments are appropriate for all skin types, conditions and sensitivities. They will effectively treat acne, pigment disorders, aging skin, smoker’s skin and photo-damaged skin. The treatment is ideal for super-sensitive skin types, as it has little to no stringing sensation. It targets patients that want gradual lightening but instant tightening.

1. Cleanse the skin thoroughly with Hydraven Gel. Rinse.

2. Apply Tri Peel exfoliating treatment to a cotton pad, placing the neck of the bottle directly onto the pad, spacing it to give a sufficient working area to complete a full-face treatment. (About 4-5 spots on the pad.) Apply an even layer to the area of treatment.

3. Allow the first layer to penetrate. Ask the patient, “On a scale of one-to-ten, ten being extremely irritating, how does your skin feel?” If they respond higher than six, do not proceed with another layer. If the answer is between one and five, proceed with another layer. (Burning is a sensation you feel, not one you see.) Give the patient a fan to cool him or herself. Allow the layer to penetrate. The skin will have a slightly tacky feeling. Apply maximum of two layers (on sensitive skin up to three on resilient).

You may apply Vit C Serum dyschromia controller at this point.

For additional strengthening, hydrating and anti-inflammatory benefits, apply two pumps of Toner all over the area of treatment. For lightening, anti-inflammatory, increased cell turnover and pore refining action, apply Vit C masks to the area of treatment.

After allowing the previous masks to penetrate (20-30 minutes), apply post peel cream to seal/occlude the area for 3 days, 4 times a day.

Optional: if the patient would like increased exfoliation and hydration, a small amount of White Peel exfoliating treatment may be applied after the 1st coat.
Finish with a mixture of post peel cream + SPF 30 to seal / occlude the treated area.

Tri Peel exfoliating treatment Ingredients: Thrichloroacetic acid (20%)

PENT PEEL

 Pent Peel exfoliating treatments are appropriate for all skin types, conditions and sensitivities. They will effectively treat acne, pigment disorders, aging skin, smoker’s skin and photo-damaged skin. The treatment is ideal for super-sensitive skin types, as it has little to no stringing sensation. It targets patients that want gradual lightening but instant tightening.

1. Cleanse the skin thoroughly with Hydraven Gel. Rinse.

2. Apply Pent Peel exfoliating treatment to a cotton pad, placing the neck of the bottle directly onto the pad, spacing it to give a sufficient working area to complete a full-face treatment. (About 4-5 spots on the pad.) Apply an even layer to the area of treatment.

3. Allow the first layer to penetrate. Burning is a sensation they feel. Give the patient a fan. Allow the layer to penetrate. The skin will have a slightly tacky feeling.

You may apply Vit C Serum dyschromia controller at this point.

For additional strengthening, hydrating and anti-inflammatory benefits, apply two pumps of Toner all over the area of treatment. For lightening, anti-inflammatory, increased cell turnover and pore refining action, apply Vit C masks to the area of treatment for 30 minutes.

Finish with a mixture of post peel cream + SPF 30 to seal / occlude the treated area for 3-5 days, 4 times a day.

Pent Peel exfoliating treatment Ingredients: Thrichloroacetic acid (30%)